Siemens SCALANCE X-300 Series User Manual

5.5.2 SFP installation in SFP media module
NOTICE
Use only approved SFPs
If you use SFPs that are not approved by Siemens AG, there is no guarantee that the device
will function according to the specification.
If you use unapproved SFPs, this can lead to the following problems:
● Damage to the device
● Loss of the approvals
● Violation of the EMC regulations
Use only approved SFPs.
You can insert or remove the SFP during ongoing operation.
Inserting an SFP
Note
Only the media module MM992-2SFP may be fitted with approved SFPs. The SFP media
module can be fitted with up to two SFPs.
Device:
Media module
Variant [Article number]
Labeling on the device
Figure
MM992-2SFP
(SFP media module)
2 x 100/1000 Mbps [6GK5 992-2AS00-8AA0]
9922AS
Installation
5.5 Inserting media modules and SFP transceivers
SCALANCE X-300
Operating Instructions, 11/2019, A5E01113043-24 117

Siemens SCALANCE X-300 Series Specifications

General

Brand	Siemens
Model	SCALANCE X-300 Series
Category	Switch
Language	English