Siemens SCALANCE X-300 Series User Manual

6.6.2 100 to 240 VAC power supply
WARNING
Danger to life from line voltage for devices with a 240 V AC supply voltage
This device can only function correctly and safely if it is transported, stored, set up, and
installed correctly, and operated and maintained as recommended.
Connecting and disconnecting may only be performed by an electrical specialist.
Connect or disconnect power supply cables only when the power is turned off!
WARNING
Devices with a 100 ... 240 V AC supply voltage do not have an approval for hazardous areas
Devices with a 100 ...240 V AC supply voltage are not approved for use in hazardous areas
according to ATEX, IECEx, FM and UL HazLoc.
NOTICE
Securing cables with dangerous voltage
Make sure that the connector cannot be released accidentally by pulling on the connecting
cable. Lay the cables in cable ducts or cable channels and secure the cables, where
necessary, with cable ties.
6.6.2.1 XR-300M product group
Table 6-9 100 to 240 V AC voltage
Device Device version (power supply) 100 to 240 V voltage
Redundant Single
XR324-12M 1 x 100 to 240 V AC - ●
6.6.2.2 X-300EEC product group
Table 6-10 100 to 240 V AC voltage
Device Device version (power supply) 100 to 240 V voltage
Redundant Single
X302-7EEC 1 x 100 to 240 V AC / 60 to 250 V DC - ●
2 x 100 to 240 V AC / 60 to 250 V DC ● -
X307-2EEC 1 x 100 to 240 V AC / 60 to 250 V DC - ●
2 x 100 to 240 V AC / 60 to 250 V DC ● -
Connecting
6.6 Power supply
SCALANCE X-300
Operating Instructions, 11/2019, A5E01113043-24 135

Siemens SCALANCE X-300 Series Specifications

General

Brand	Siemens
Model	SCALANCE X-300 Series
Category	Switch
Language	English