Siemens SCALANCE X-300 Series User Manual

4.3 Components of the product
Unpacking and checking
WARNING
Do not use any parts that show evidence of damage
If you use damaged parts, there is no guarantee that the device will function according to the
specification.
If you use damaged parts, this can lead to the following problems:
● Injury to persons
● Loss of the approvals
● Violation of the EMC regulations
● Damage to the device and other components
Use only undamaged parts.
1. Make sure that the package is complete.
2. Check all the parts for transport damage.
4.3.1 Components of the product
Scope of delivery
The following components are supplied with a SCALANCE X-300:
● Device with C-PLUG exchangeable medium
● A four-pin terminal block for the 24 V DC power supply
● A two-pin terminal block for the signaling contact
● Product CD with documentation and software
4.3.2 X-300M components of the product
Scope of delivery
The following components are supplied with a SCALANCE X-300M:
● Device with C-PLUG exchangeable medium
● A four-pin terminal block for the power supply:
– 24 V DC with X308-2M
– 12 V DC with X308-2M TS
Description of the device
4.3 Components of the product
SCALANCE X-300
44 Operating Instructions, 11/2019, A5E01113043-24

Siemens SCALANCE X-300 Series Specifications

General

Brand	Siemens
Model	SCALANCE X-300 Series
Category	Switch
Language	English