EasyManua.ls Logo

Siemens SCALANCE X-300 Series

Siemens SCALANCE X-300 Series
312 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
A.4 Electrical tests (EEC devices)
Regulations / standards
IEC 60255 (product standards)
IEEE C37.90.0/.1/.2
UL 508
Further standards: See individual tests.
Insulation test
Relevant standards: IEC 602555 and IEC 6087021
Voltage test (routine test) for all circuits except communications and time synchronization
interfaces 2.5 kV (eff) 50 Hz / 3.5 kV DC
Voltage test (routine test) only for protected communications interfaces 500 V (eff) 50 Hz / 707
V DC
Voltage test (routine test) for all circuits except communications interfaces, class III 5 kV (peak);
1.2/50 μs; 0.5 J
EMC tests of immunity (type tests)
Relevant standards: IEC 602556 and -22 (product standards), EN 6100062 (generic
standard)
High frequency test IEC 60255221, class III / IEEE C37.90.1, 2.5 kV (peak); 1 MHz
Discharge of static electricity IEC 60255222, class IV and IEC 6100042, class IV 8 kV
contact discharge; 15 kV air discharge
Radiated electromagnetic field disturbance, frequency sweep IEC 60255223, class III
IEC 6100043, class III 10 V/m; 80 MHz to 1000 MHz; 80 % AM; 1 kHz 10 V/m; 800 MHz to
960 MHz; 80 % AM; 1 kHz 20 V/m; 1.4 GHz to 2.0 GHz; 80 % AM; 1 kHz
Irradiation with RF field, single frequencies IEC 60255223, IEC 6100043, class III –
amplitude modulated – pulse modulated 10 V/m 80/160/450/900 MHz; 80 % AM; 1 kHz
Fast transients / burst IEC 60255224 and IEC 6100044 and IEEE C37.90.1 class IV 4 kV
High voltage spikes (SURGE), IEC 6100045 installation class 4, auxiliary voltage pulse:
1.2/50 μs common mode: 4 kV; diff. mode: 2 kV
Relay outputs, common mode: 4 kV; diff. mode: 2 kV (valid for the signaling contact
100..240 V AC/60...250 V DC)
Line conducted high frequency, amplitude modulated IEC 6100046, class III 10 V; 150 kHz to
80 MHz; 80 % AM; 1 kHz
Power frequency magnetic field IEC 602556 IEC 6100048, class IV 0.5 mT; 50 Hz, 30 A/m
permanent; 300 A/m for 3 s; 50 Hz
Radiated electromagnetic interference IEEE Std C37.90.2 35 V/m; 80 MHz to 1000 MHz
Appendix
A.4 Electrical tests (EEC devices)
SCALANCE X-300
Operating Instructions, 11/2019, A5E01113043-24 307

Table of Contents

Other manuals for Siemens SCALANCE X-300 Series

Related product manuals