11.5.1.2 SCALANCE X-300 declaration of conformity
You will find the EC Declaration of Conformity for these products on the Internet at the following
address:
SCALANCE X-300 declaration of conformity (
https://
support.industry.siemens.com/cs/ww/en/ps/15296/cert)
1. Click on the entry "SCALANCE X-300 managed" in the navigation panel at the top edge of
the window and from the drop-down list that opens, select the entry for your product group.
2. Select the entry "Certificate" from the "Entry type"drop-down list.
Result: A list of the available certificates is displayed.
11.5.1.3 Overview of XR-300M EEC approvals
Note
The 24 to 48 V variants do not have an E1 approval.
The 100 to 240 V variants have C-Tick and CE approvals, are only UL508 listed, have no UL
hazloc, FM or ATEX.
Table 11-5 Overview of the approvals
Device Variant c‑UL‑us
Inf. Tech.
Eq.
c‑UL‑us
for Hazardous
Locations
1)
c‑UL‑us
Ind. Cont.
Eq.
FM
1)
C‑TIC
K
CE ATEX95 Zone
2
1)
XR324‑4M
EEC
1 x 24 to 48 VDC, data cable
outlet on front
● ● - ● ● ● ●
2 x 24 to 48 VDC, data cable
outlet on front
● ● - ● ● ● ●
1 x 100 to 240 VAC / 60 to
250 VDC, data cable outlet
on front
- - ● - ● ● -
2 x 100 to 240 VAC / 60 to
250 VDC, data cable outlet
on front
- - ● - ● ● -
1 x 24 to 48 VDC, data cable
outlet at rear
● ● - ● ● ● ●
2 x 24 to 48 VDC,
Data cable outlet at rear
● ● - ● ● ● ●
1 x 100 to 240 VAC / 60 to
250 VDC, data cable outlet
at rear
- - ● - ● ● -
2 x 100 to 240 VAC / 60 to
250 VDC, data cable outlet
at rear
- - ● - ● ● -
1
For temperature information "T.." or the maximum ambient temperature "Ta:..", refer to the type plate.
Certifications and approvals
11.5 XR-300M EEC product group
SCALANCE X-300
Operating Instructions, 11/2019, A5E01113043-24 279
To Next Page
Loading...
