To Next Page

To Previous Page

11.5.1.4 XR-300M EEC mechanical stability (in operation)

The devices of the SCALANCE XR-300M EEC product group meet the following standards

(prerequisite: rack mounted with 4 securing points):

● IEC 60068-2-6

(vibrations during transportation and operation)

Test parameters:

5 – 9 Hz: 3.5 mm

9 – 150 Hz: 1 g

1 octave/min, 20 sweeps

● IEC 60068-2-27

(shocks during operation)

Test parameters:

15 g, 11 ms duration

6 shocks per axis

● IEC 60068-2-6

(vibrations during transportation)

Test parameters:

10 – 58 Hz: 0.075 mm

85 – 150 Hz: 1 g

1 octave/min, 20 sweeps

11.6 Product group X-300M PoE

11.6.1 Approvals

11.6.1.1 X-300M PoE approvals, certificates

Approvals issued

Note

Issued approvals on the type plate of the device

The specified approvals apply only when the corresponding mark is printed on the product. You

can check which of the following approvals have been granted for your product by the markings

on the type plate.

Approvals for shipbuilding are not printed on the device type plate.

Certifications and approvals

11.6 Product group X-300M PoE

SCALANCE X-300

280 Operating Instructions, 11/2019, A5E01113043-24

Siemens SCALANCE X-300 Series User Manual

Other manuals for Siemens SCALANCE X-300 Series