Siemens SCALANCE X-300 Series User Manual

WARNING
Personal injury and property damage can occur
The installation of expansions that are not approved for SIMATIC NET products or their target
systems may violate the requirements and regulations for safety and electromagnetic
compatibility.
Only use expansions that are approved for the system.
Note
The test was performed with a device and a connected communications partner that also meets
the requirements of the standards listed above.
When operating the device with a communications partner that does not comply with these
standards, adherence to the corresponding values cannot be guaranteed.
11.4.1.2 SCALANCE X-300 declaration of conformity
You will find the EC Declaration of Conformity for these products on the Internet at the following
address:
SCALANCE X-300 declaration of conformity (https://
support.industry.siemens.com/cs/ww/en/ps/15296/cert)
1. Click on the entry "SCALANCE X-300 managed" in the navigation panel at the top edge of
the window and from the drop-down list that opens, select the entry for your product group.
2. Select the entry "Certificate" from the "Entry type"drop-down list.
Result: A list of the available certificates is displayed.
11.4.1.3 Overview of the approvals
Table 11-4 Overview of the approvals
Device Variant c‑UL‑us
Inf. Tech.
Eq.
c‑UL‑us
for Hazard‐
ous Loca‐
tions
1)
c‑UL‑us
Ind. Cont.
Eq.
FM
1)
C‑TICK CE ATEX95
Zone 2
1)
X302-7EE
C
X302-2EE
C
24 to 48
VDC
● ● ‑ ● ● ● ●
100...240
VAC /
60...250
VDC
‑ ‑ ● ‑ ● ● ‑
1
For temperature information "T.." or the maximum ambient temperature "Ta:..", refer to the type plate.
Certifications and approvals
11.4 X-300EEC product group
SCALANCE X-300
Operating Instructions, 11/2019, A5E01113043-24 273

Siemens SCALANCE X-300 Series Specifications

General

Brand	Siemens
Model	SCALANCE X-300 Series
Category	Switch
Language	English