Configuring with Web Based Management
5.4 The "System" menu
SCALANCE XB-200 Web Based Management
108 Configuration Manual, 04/2015, C79000-G8976-C360-02
1. Click the "SIMATIC Time Client" check box to enable the SIMATIC Time Client.
2. Click the "Set Values" button.
Auto logout
Setting the automatic logout
On this page, set the times after which there is an automatic logout from WBM or the CLI
following user in activity.
If you have been logged out automatically, you will need to log in again.
1. Enter a value of 60-3600 seconds in the "Web Base Management [s]" input box. If you
enter the value 0, the automatic logout is disabled.
2. Enter a value of 60-600 seconds in the "CLI (TELNET, SSH, Serial) [s]" input box. If you
enter the value 0, the automatic logout is disabled.
3. Click the "Set Values" button.
To Next Page
Loading...
