Siemens SCALANCE XB-200 - Users

Configuring with Web Based Management
5.4 The "System" menu
SCALANCE XB-200 Web Based Management
98 Configuration Manual, 04/2015, C79000-G8976-C360-02
5.4.9.4
Users
User-specific security settings
On the WBM page, you can create new SNMPv3 users and modify or delete existing users.
The user-based security model works with the concept of the user name; in other words, a
user ID is added to every frame. This user name and the applicable security settings are
checked by both the sender and recipient.
Description
The page contains the following boxes:
●
User Name
Enter a freely selectable user name. After you have entered the data, you can no longer
modify the name.
The table has the following columns:
●
Select
Select the row you want to delete.
●
User Name
Shows the created users.
●
Group Name
Select the group to which the user will be assigned.
●
Authentication Protocol
Specify the authentication protocol. Can only be enabled, if this group supports the
function.
The following settings are available:
– none
– MD5
– SHA