Siemens SCALANCE XB-200 - Unicast; Filtering

Configuring with Web Based Management
5.5 The "Layer 2" menu
SCALANCE XB-200 Web Based Management
Configuration Manual, 04/2015, C79000-G8976-C360-02
159
Table 2 has the following columns:
●
Port
Shows the port.
●
Setting
From the drop-down list, select whether or not the port will send or receive LLDP frames.
You have the following options available:
– Rx
This port can only receive LLDP frames.
– Tx
This port can only send LLDP frames.
– Rx & Tx
This port can receive and send LLDP frames.
– "-" (disabled)
This port can neither receive nor send LLDP frames.
Steps in configuration
1. From the drop-down list in the row of the port you want to configure, select the LLDP
functionality.
2. Click the "Set Values" button.
5.5.12
Unicast
5.5.12.1
Filtering
Address filtering
This table shows the source addresses of unicast address frames entered statically by the
user during parameter assignment.
On this page, you also define the static unicast filters.