Siemens SCALANCE XB-200 - Technical specifications of the SCALANCE XB213-3

Configuring with Web Based Management
5.3 The "Information" menu
SCALANCE XB-200 Web Based Management
46 Configuration Manual, 04/2015, C79000-G8976-C360-02
5.3.2
Versions
Versions of hardware and software
This page shows the versions of the hardware and software of the device. You cannot
configure anything on this page.
Description of the displayed values
Table 1 has the following columns:
●
Hardware -
Basic Device
Shows the basic device.
●
Name
Shows the name of the device.
●
Revision
Displays the hardware version of the device.
●
Order ID
Shows the order number of the device.
Table 2 has the following columns:
●
Software
– Firmware
Shows the current firmware version. If a new firmware file was downloaded and the
device has not yet restarted, the firmware version of the downloaded firmware file is
displayed here. After the next restart, the downloaded firmware is activated and used.
– Bootloader
Shows the version of the boot software stored on the device.
– Firmware_Running
Shows the firmware version currently being used on the device.
●
Description
Shows the short description of the software.