Configuring with Web Based Management
5.4 The "System" menu
SCALANCE XB-200 Web Based Management
Configuration Manual, 04/2015, C79000-G8976-C360-02
107
SIMATIC Time Client
Time setting via SIMATIC time client
Note
To avoid time jumps, make sure that there is only one time server
in the network.
The page contains the following boxes:
●
Select this check box to enable the device as a SIMATIC time client.
●
This box displays the current system time.
●
Last Synchronization Time
This box is read-only and shows when the last time-of-day synchronization took place.
●
Last Synchronization Mechanism
This box displays how the last time-of-day synchronization was performed. The following
methods are possible:
– Not set
The system time was not set.
– Manual
Manual time setting
– SNTP
Automatic time-of-day synchronization with SNTP
– NTP
Automatic time-of-day synchronization with NTP
– SIMATIC
Automatic time-of-day synchronization using the SIMATIC time frame
To Next Page
Loading...
