Siemens SCALANCE XB-200 - I&M

Configuring with Web Based Management
5.3 The "Information" menu
SCALANCE XB-200 Web Based Management
Configuration Manual, 04/2015, C79000-G8976-C360-02
47
●
Version
Shows the version number of the software version.
●
Date
Shows the date on which the software version was created.
5.3.3
I&M
Identification and Maintenance data
This page contains information about device-specific vendor and maintenance data such as
the order number, serial number, version number etc. You cannot configure anything on this
page.
Description of the displayed values
The table has the following rows:
●
Manufacturer ID
Shows the manufacturer ID.
●
Order ID
Shows the order number.
●
Serial Number
Shows the serial number.
●
Hardware Revision
Shows the hardware version.
●
Software Revision
Shows the software version.