Configuring with Web Based Management
5.5 The "Layer 2" menu
SCALANCE XB-200 Web Based Management
Configuration Manual, 04/2015, C79000-G8976-C360-02
173
On this page you can specify the ports for which RMON statistics are displayed.
The RMON statistics are displayed on the "Information > Ethernet Statistics" page on the
"Packet Size", "Packet Type" and "Packet Error" tabs.
Figure 5-4 RMON Statistics
●
If you select this check box, Remote Monitoring (RMON) allows diagnostics data to be
collected on the device, prepared and read out using SNMP by a network management
station that also supports RMON. This diagnostic data, for example port-related load
trends, allow problems in the network to be detected early and eliminated.
Note
If you disable RMON, these statistics are not deleted but retain their last status.
●
Select the ports for which statistics will be displayed.
To Next Page
Loading...
