Siemens SCALANCE XB-200 - Unicast

Configuring with Web Based Management
5.3 The "Information" menu
SCALANCE XB-200 Web Based Management
Configuration Manual, 04/2015, C79000-G8976-C360-02
65
– Jabbers
VLAN-tagged packets with an incorrect CRC checksum that were discarded because
they were too long.
– Collisions
Detected collisions.
Description of the button
"Reset Counter" button
Click the "Reset Counter" to reset all counters. The counters are reset by a restart.
5.3.9
Unicast
Status of the unicast filter table
This page shows the current content of the unicast filter table. This table lists the source
addresses of unicast address frames. Entries can be made either dynamically when a node
sends a frame to a port or statically by the user setting parameters.
Figure 5-1 Unicast
Description
This table contains the following columns:
●
VLAN ID
Shows the VLAN ID assigned to this MAC address.
●
MAC Address
Shows the MAC address of the node that the device has learned or the user has
configured.