Configuring with Web Based Management
5.5 The "Layer 2" menu
SCALANCE XB-200 Web Based Management
Configuration Manual, 04/2015, C79000-G8976-C360-02
135
Port-based VLAN
Processing received frames
On this page, you specify the configuration of the port properties for receiving frames.
Description of the displayed boxes
Table 1 has the following columns:
●
Shows that the settings are valid for all ports.
●
Priority / Port VID / Acceptable Frames / Ingress Filtering
Select the setting in the drop-down list. If "No Change" is selected, the entry in table 2
remains unchanged.
●
If you click the button, the setting is adopted for all ports of table 2.
Table 2 has the following columns:
●
Shows the available ports. The port is made up of the module number and the port
number, for example port 0.1 is module 0, port 1.
●
From the drop-down list, select the priority given to untagged frames.
The CoS priority (Class of Service) used in the VLAN tag. If a frame is received without a
tag, it will be assigned this priority. This priority specifies how the frame is further
processed compared with other frames.
There are a total of eight priorities with values 0 to 7, where 7 represents the highest
priority (IEEE 802.1p Port Priority).
To Next Page
Loading...
