Siemens SCALANCE XB-200 - ST Port

Configuring with Web Based Management
5.5 The "Layer 2" menu
SCALANCE XB-200 Web Based Management
Configuration Manual, 04/2015, C79000-G8976-C360-02
149
5.5.8.3
ST Port
Configuration of the STP ports
When the page is called, the table displays the current status of the configuration of the port
parameters.
To configure them, click the relevant cells in the port table.
Description of the displayed boxes
Table 1 has the following columns:
●
1st column
Shows that the settings are valid for all ports of table 2.
●
Spanning Tree Status
Select the setting from the drop-down list. You have the following setting options:
– enabled
Port is integrated in the spanning tree.
– disabled
Port is not integrated in the spanning tree.
– No Change
Table 2 remains unchanged.
●
Copy to Table
If you click the button, the setting is adopted for all ports of table 2.