To Next Page

To Previous Page

Configuring with Web Based Management

5.4 The "System" menu

SCALANCE XB-200 Web Based Management

Configuration Manual, 04/2015, C79000-G8976-C360-02

121

5.4.16

PNIO

Settings for PROFINET IO

This page shows the PROFINET IO AR status and the device name.

Description of the displayed boxes

The page contains the following boxes:

●

PNIO Mode

Shows whether PNIO is enabled ("On") or disabled ("Off").

●

PNIO Mode for next boot

Set whether PNIO will be enabled ("On") or disabled ("Off") after the next device restart.

Note

PNIO AR Status

If a PROFINET connection is established; in other words the PNIO AR status is "Online",

you cannot disable PNIO.

●

PNIO AR Status

This box shows the status of the PROFINET IO connection; in other words whether the

device is connected to a PROFINET IO controller "Online " or "Offline".

Here, online means that a connection to a PROFINET IO controller exists, that this has

downloaded its configuration data to the device and that the device can send status data

to the PROFINET IO controller. In this status known as "in data exchange", the

parameters set with the PROFINET IO controller cannot be configured.

●

PNIO Name of Station

This box displays the PROFINET IO device name according to the configuration in HW

Config of STEP 7.

Siemens SCALANCE XB-200 Web Based Management

Other manuals for Siemens SCALANCE XB-200