Configuring with Web Based Management
5.6 The "Security" menu
SCALANCE XB-200 Web Based Management
Configuration Manual, 04/2015, C79000-G8976-C360-02
181
Management ACL
Description of configuration
On this page, you can increase the security of your device. To specify which station with
which IP address is allowed to access your device, configure the IP address or an entire
address range.
You can select the protocols and the ports of the station with which it is allowed to access
the device. You define the VLAN in which the station may be located. This ensures that only
certain stations within a VLAN have access to the device.
Description of the displayed boxes
Note
Before you enable this function, note the following
A bad configuration on the "Management Access Control List" page can result in you being
unable to access the device. You should therefore configure an access rule that allows
a
ccess to the management before you enable the function.
To Next Page
Loading...
Need help?
General