Siemens SCALANCE XB-200 - ARP Table

Configuring with Web Based Management
5.3 The "Information" menu
SCALANCE XB-200 Web Based Management
48 Configuration Manual, 04/2015, C79000-G8976-C360-02
●
Revision counter
Regardless of a version change, this box always displays the value "0".
●
Revision Date
Date and time of the last revision
●
Function Tag
Shows the function tag (plant designation) of the device. The plant designation (HID) is
created during configuration of the device with HW Config of STEP 7.
●
Location Tag
Shows the location tag (location identifier) of the device. The location identifier (LID) is
created during configuration of the device with HW Config of STEP 7.
●
Date
Shows the date created during configuration of the device with HW Config of STEP 7.
●
Description
Shows the description created during configuration of the device with HW Config of
STEP 7.
5.3.4
ARP table
Assignment of MAC address and IP address
With the Address Resolution Protocol (ARP), there is a unique assignment of MAC address
to IP address. This assignment is kept by each network node in its own separate ARP table.
The WBM page shows the ARP table of the device.
Description
The table has the following columns:
●
Interface
Shows the interface via which the row entry was learnt.
●
MAC Address
Shows the MAC address of the target or source device.