Siemens SCALANCE XB-200 - The Layer 2 Menu; Configuration

Configuring with Web Based Management
5.5 The "Layer 2" menu
SCALANCE XB-200 Web Based Management
126 Configuration Manual, 04/2015, C79000-G8976-C360-02
5.5
The "Layer 2" menu
5.5.1
Configuration
Configuring layer 2
On this page, you create a basic configuration for the functions of layer 2. On the
configuration pages of these functions, you can make detailed settings. You can also check
the settings on the configuration pages.
Description of the displayed boxes
●
Dynamic MAC Aging
Enable or disable the "aging" mechanism. You can configure other settings in "Layer 2 >
Dynamic MAC Aging".
●
Redundancy Type
The following settings are available:
–
"-" (disabled)
The redundancy function is disabled.
–
Ring
If you select this option, you specify the required redundancy mode in the
"Redundancy Mode" drop-down list.
–
Spanning Tree
If you select this option, you specify the required compatibility mode in the
"Redundancy Mode" drop-down list.