Siemens SCALANCE XB-200 - Page 125

Configuring with Web Based Management
5.4 The "System" menu
SCALANCE XB-200 Web Based Management
Configuration Manual, 04/2015, C79000-G8976-C360-02
125
This table contains the following columns:
●
Pair
Shows the wire pair in the cable.
Note
Wire pairs
Wire pairs 4
-5 and 7-8 of 10/100 Mbps network cables are not used.
The wire pair assignment
- pin assignment is as follows (DIN 50173):
Pair 1 = pin 1
-2
Pair 2 = pin 3
-6
Pair 3 = pin 4
-5
Pair 4 =
pin 7-8
●
Status
Displays the status of the cable.
●
Distance
Displays the distance to the cable end, cable break, or short-circuit. The value for the
distance has a tolerance of +/- 1 m.