Siemens SCALANCE XB-200 - Port

Configuring with Web Based Management
5.5 The "Layer 2" menu
SCALANCE XB-200 Web Based Management
Configuration Manual, 04/2015, C79000-G8976-C360-02
139
4. Change to the following tab to make further detailed settings for the session ID.
5. Click the check box in the first column to select the row.
Click the "Delete" button to delete the selected row.
5.5.5.2
Port
Mirroring ports
You can only configure the settings on this page if you have already generated a session ID
with the session type "Port Based" on the "General" tab.
Description of the displayed boxes
●
Session ID
Shows the session.
●
Ingress Mirroring
Enable or disable listening in on incoming packets at the required port.
●
Egress Mirroring
Enable or disable listening in on outgoing packets at the required port.
Note
Mirroring with ring ports
If you enable the mirroring function for a ring port, the ring port sends test frames even in the
"li
nk down" status.