Configuring with Web Based Management
5.5 The "Layer 2" menu
SCALANCE XB-200 Web Based Management
130 Configuration Manual, 04/2015, C79000-G8976-C360-02
1. For each value in the "COS" column, select the forwarding queue from the "Queue" drop-
down list.
2. Click the "Set Values" button.
On this page, DSCP settings are assigned to various queues (Traffic Queues).
Description of the displayed values
The table has the following columns:
●
Shows the DSCP priority of the incoming packets.
●
From the drop-down list, select the forwarding queue (send priority) that is assigned to
the DSCP value.
The higher the queue number, the higher the send priority.
The DSCP codes are assigned to the queues as follows:
● DSCP codes 0 - 15 → Queue 1
● DSCP codes 16 - 31 → Queue 2
To Next Page
Loading...
