Configuring with Web Based Management
5.3 The "Information" menu
SCALANCE XB-200 Web Based Management
Configuration Manual, 04/2015, C79000-G8976-C360-02
63
Packet type
Received frames sorted by type
This page displays how many frames of the type "Unicast", "Multicast" and "Broadcast" were
received at each port. You cannot configure anything on this page.
The displayed values are transferred by RMON.
On the page "Layer 2 > RMON > Statistics", you can set the ports for which values will be
displayed.
Description of the displayed values
The table has the following columns:
●
Shows the available ports. The port is made up of the module number and the port
number, for example port 0.1 is module 0, port 1.
●
Unicast / Multicast / Broadcast
The other columns after the port number contain the absolute numbers of the incoming
frames according to their frame type "Unicast", "Multicast" and "Broadcast".
Description of the button
"Reset Counter" button
Click the "Reset Counter" to reset all counters. The counters are reset by a restart.
To Next Page
Loading...
