Siemens SCALANCE XB-200 - Page 157

Configuring with Web Based Management
5.5 The "Layer 2" menu
SCALANCE XB-200 Web Based Management
Configuration Manual, 04/2015, C79000-G8976-C360-02
157
Description of the displayed values
Table 1 has the following columns:
●
1st column
Shows that the settings are valid for all ports of table 2.
●
Setting
Select the setting from the drop-down list. If "No Change is selected, the entry in table 2
remains unchanged.
●
Copy to Table
If you click the button, the setting is adopted for all ports of table 2.
Table 2 has the following columns:
●
Port
Shows the available ports. The port is made up of the module number and the port
number, for example port 0.1 is module 0, port 1.
●
Setting
From the drop-down list, select whether the port should block or forward outgoing DCP
frames. You have the following options available:
–
Forward
DCP frames are forwarded via this port.
–
Block
No outgoing DCP frames are forwarded via this port. It is nevertheless still possible to
receive via this port.
Steps in configuration
1. From the options in the drop-down list in the row, select which ports should support
sending DCP frames.
2. Click the "Set Values" button.