Siemens SCALANCE XC-200 Configuration Manual

Requirement
● There is a device configuration on the PLUG.
● You are in the Plug Configuration mode.
The command prompt is:
cli(config-plug)#
Syntax
Call the command without parameters:
factoryclean
Result
The device configuration on the PLUG is deleted.
4.1.3.2 write
Description
With this command, you format the PLUG and copy the current device configuration to it.
Requirement
● The PLUG is formatted.
● You are in the Plug Configuration mode.
The command prompt is:
cli(config-plug)#
Syntax
Call the command without parameter assignment:
write
Result
The current device configuration has been copied to the formatted PLUG.
Functions specific to SCALANCE
4.1 PLUG
SCALANCE XB-200/XC-200/XF-200BA/XP-200/XR-300WG Command Line Interface
130 Configuration Manual, 07/2017, C79000-G8976-C361-06

Siemens SCALANCE XC-200 Specifications

General

Brand	Siemens
Model	SCALANCE XC-200
Category	Switch
Language	English