General information
2
2.1 System functions hardware equipment
Availability of the system functions
The following table shows the availability of the system functions on the IE switches. Note that
all functions are described in this configuration manual and in the online help. Depending on
your IE switch, some functions are not available.
We reserve the right to make technical changes.
SCALANCE
XB-200
SCALANCE
XR-300WG
SCALANCE
XC-200
SCALANCE
XP-200
SCALANCE
XF-200BA
Informa‐
tion
ARP table ✓ ✓ ✓ ✓ ✓
Log table ✓ ✓ ✓ ✓ ✓
Ethernet Statistics ✓ ✓ ✓ ✓ ✓
Diagnostics (tempera‐
ture)
- ✓ ✓ ✓ ✓
System SMTP client ✓ ✓ ✓ ✓ ✓
DHCP client ✓ ✓ ✓ ✓ ✓
DHCP server ✓ (restricted) ✓ (restricted) ✓ ✓ ✓
SNMP ✓ ✓ ✓ ✓ ✓
Manual time setting ✓ ✓ ✓ ✓ ✓
DST - - ✓ ✓ ✓
SNTP ✓ ✓ ✓ ✓ ✓
NTP ✓ ✓ ✓ ✓ ✓
SIMATIC Time Client ✓ ✓ ✓ ✓ ✓
NFC - - ✓ - -
Auto logout ✓ ✓ ✓ ✓ ✓
Syslog Client ✓ ✓ ✓ ✓ ✓
Fault monitoring ✓ ✓ ✓ ✓ ✓
PROFINET ✓ ✓ ✓ ✓ ✓
EtherNet/IP ✓ ✓ ✓ ✓ ✓ (not with
DNA devices)
Power over Ethernet - - - ✓ ("PoE" identi‐
fier in device
names)
-
Cable tester ✓ ✓ ✓ ✓ ✓
SFP diagnostics - ✓ ✓ - -
Fiber monitoring - - ✓ - -
SCALANCE XB-200/XC-200/XF-200BA/XP-200/XR-300WG Command Line Interface
Configuration Manual, 07/2017, C79000-G8976-C361-06 25
To Next Page
Loading...
