Siemens SCALANCE XC-200 Configuration Manual

2.3 Features not supported
The following features are not supported by the IE switches SCALANCE XB-200, SCALANCE
XC-200, SCALANCE XP-200 and SCALANCE XR-300WG with firmware version 3.0 and by
the IE switches SCALANCE XF-200BA with firmware version 3.1:
● FQDN
● IPv6
● Layer 3 features
● Loopback
● PIM
● UMAC
Even if these features are are listed as parameters in the documentation and are displayed by
the help functions help and ? you cannot execute them with a SCALANCE XB-200,
SCALANCE XC-200, SCALANCE XF-200BA, SCALANCE XP-200 and SCALANCE
XR-300WG.
General information
2.3 Features not supported
SCALANCE XB-200/XC-200/XF-200BA/XP-200/XR-300WG Command Line Interface
30 Configuration Manual, 07/2017, C79000-G8976-C361-06

Siemens SCALANCE XC-200 Specifications

General

Brand	Siemens
Model	SCALANCE XC-200
Category	Switch
Language	English