11.4.4.2 stop
Description
With this command, you stop automatic learning and convert all learned MAC addresses to
static entries.
Requirement
You are in the AUTOLEARN mode.
The command prompt is as follows:
cli(config-auto-learn)#
Syntax
Call the command without parameters:
stop
Result
Automatic learning is stopped and all learned entries are converted to static entries.
Further notes
You start automatic learning with the start command.
Security and authentication
11.4 Port Access Control List Locked Ports
SCALANCE XB-200/XC-200/XF-200BA/XP-200/XR-300WG Command Line Interface
Configuration Manual, 07/2017, C79000-G8976-C361-06 523
To Next Page
Loading...
Need help?
General