8.1 GARP
This section describes commands of the following protocols:
● GARP - Generic Attribute Registration Protocol
● GMRP - GARP Multicast Registration Protocol
● GVRP - GARP VLAN Registration Protocol
8.1.1 The "show" commands
This section describes commands with which you display various settings.
8.1.1.1 show forward-all
Description
With this command, you display the entries of the GMRP forward all table.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameters:
show forward-all
Result
The entries of the GMRP forward all table are displayed.
8.1.1.2 show forward-unregistered
Description
With this command, you display the entries of the GMRP forward unregistered table.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
Layer 2 management protocols
8.1 GARP
SCALANCE XB-200/XC-200/XF-200BA/XP-200/XR-300WG Command Line Interface
370 Configuration Manual, 07/2017, C79000-G8976-C361-06
To Next Page
Loading...
Need help?
General