Siemens SIMATIC ET 200eco PN - Page 105

General technical data
8.3 Mechanical and climatic environmental conditions
ET 200eco PN
Operating Instructions, 08/2016, A5E01250250-AJ
105
Designation
Article number
Fields of application
From product
version
-25 °C to
55 °C
-25 °C to
60 °C
-40 °C to
60 °C
8 AI RTD/TC 8×M12
6ES7144-6KD50-0AB0
X
X
X
1
4 AO U/I 4×M12 6ES7145-6HD00-0AB0
X
X
1
X X X 4
4 IO-L + 8 DI + 4 DO DC 24V/1,3A 8×M12
6ES7148-6JA00-0AB0
X
X
1
4 IO-L 4×M12
6ES7148-6JD00-0AB0
X
X
X
1
PD DC 24V 1×7/8" 4×M12
6ES7148-6CB00-0AA0
X
1
Terminal block
6ES7194-6CA00-0AA0
X
1
Mounting rail
6ES7194-6GA00-0AA0
X
X
X
1
Mechanical environmental conditions
The table below shows the mechanical environmental conditions in the form of sinusoidal
oscillation.
Devices
Frequency band
Continuous
Tested at ...
Without mounting rail
10 ≤ f ≤ 58 Hz
1.5 mm amplitude
3 mm amplitude
58 ≤ f ≤ 150 Hz
20 g constant acceleration
40 g constant acceleration
With mounting rail
5 ≤ f ≤ 8 Hz
15 mm amplitude
-
8 ≤ f ≤ 150 Hz
5 g constant acceleration
10 g constant acceleration
Compatibility test, mechanical environmental conditions
The table below provides information about the type and scope of the tests of mechanical
environmental conditions.
Test ...
Test standard
Terminal and I/O devices
Vibration Vibration test accord-
ing to IEC 60068-2-6
Without mounting
rail
With mounting rail
Type of vibration: Frequency sweeps at a rate of change of 1
octave/minute.
10 Hz ≤ f ≤ 58 Hz, constant amplitude 3 mm
58 Hz ≤ f ≤ 150 Hz, constant acceleration 40 g
5 Hz ≤ f ≤ 12 Hz, constant amplitude 15 mm
12 Hz ≤ f ≤ 150 Hz, constant acceleration 10 g
Duration of vibration: 10 frequency sweeps per axis in each of
three perpendicular axes
Shock Shock, tested in
accordance with
IEC 60068-2-27
Type of shock: Half-sine
Shock intensity: 30 g peak value, 18 ms duration
Direction of shock: 3 shocks in each +/- direction at each of the three vertically
aligned axes
Continuous
shock
Shock, tested in
accordance with
IEC 60068-29
Type of shock: Half-sine
Shock intensity: 25 g peak value, 6 ms duration
Direction of shock: 1000 shocks in each +/- direction at each of the three vertically
aligned axes