Siemens SIMATIC ET 200eco PN - Page 106

General technical data
8.3 Mechanical and climatic environmental conditions
ET 200eco PN
106 Operating Instructions, 08/2016, A5E01250250-AJ
Extended environmental conditions for outdoor use
The table below provides information about the type and scope of the tests for extended
environmental conditions for outdoor use.
Test ...
Test standard
Conditions/Comments
Salt spray IEC 60068-2-52 Severity level 1 for products used at sea or close to the ocean:
4 cycles each with:
• 2 h with 5 % NaCl at 35 °C
• 7 days at 40 °C/93 % rel. humidity
UV resistance Chamber with glass: Sun test CPS plus Fa. Atlas
Duration: 12 weeks
• Irradiance (E): 550 W/m²
• Black standard temperature (BST): 55 °C
Condensation
changing climate
DIN EN ISO 6270-2 Condensation climate with alternating humidity and air temperature (AHT):
84 cycles each with:
• 8 h at 40 °C +3 °C with 100% relative humidity (condensation)
• 16 h at 18 °C to 28 °C with 100% relative humidity
Thermal shock test IEC 60068-2-14 Na Temperature: -40 °C/+125 °C
Duration: 500 cycles (500 h)
Device is switched off
Hot storage IEC 60068-2-2 Bb Temperature: 100 °C
Duration: 1 year
Devices for operating range of extended environmental conditions in outdoor use
The following devices can be used for extended environmental conditions in outdoor use:
Designation
Article number
From product version
8 DI DC 24V 4×M12
6ES7141-6BF00-0AB0
4
8 DI DC 24V 8×M12
6ES7141-6BG00-0AB0
4
16 DI DC 24V 8×M12
6ES7141-6BH00-0AB0
4
8 DO DC 24V/1,3A 4×M12
6ES7142-6BF00-0AB0
4
8 DO DC 24V/0,5A 4×M12
6ES7142-6BF50-0AB0
4
8 DO DC 24V/1,3A 8×M12
6ES7142-6BG00-0AB0
4
8 DO DC 24V/2,0A 8×M12
6ES7142-6BR00-0AB0
4
16 DO DC 24V/1,3A 8×M12
6ES7142-6BH00-0AB0
4
8 DIO DC 24 V/1,3A 8×M12
6ES7147-6BG00-0AB0
4
8 AI 4 U/I + 4 RTD/TC 8×M12
6ES7144-6KD00-0AB0
4
8 AI RTD/TC 8×M12 6ES5144-6KD50-0AB0 1
4 AO U/I 4×M12
6ES7145-6HD00-0AB0
4