Product overview
1.2 ET 200eco PN Distributed I/O Device
ET 200eco PN
18 Operating Instructions, 08/2016, A5E01250250-AJ
Further components of ET 200eco PN
Table 1- 6 Further components of ET 200eco PN
Terminal block You can connect up to 10 A per voltage
to the terminal block for distribution to
the I/O devices. A maximum of 4 A per
voltage is available short-circuit protect-
ed for each I/O device.
Voltage dis-
tributor
You can supply up to 8 A per voltage at
the PD DC 24V 1×7/8" 4×M12 and
distribute up to 4 A per voltage and
connector short-circuit-protected
through 4 connectors.
① LEDs for forwarding 1L/2L
② LEDs for forwarding 1L/2L
③ X05: Status of voltage supply
④ X01 ... X04: Loop through of the
Mounting rail You can install several I/O devices on
the mounting rail.
To Next Page
Loading...
