Siemens SIMATIC ET 200eco PN - Page 19

Product overview
1.2 ET 200eco PN Distributed I/O Device
ET 200eco PN
Operating Instructions, 08/2016, A5E01250250-AJ
19
IO Controller
The ET 200eco PN can communicate with all IO controllers that conform to IEC 61158.
At least STEP 7 V5.4, SP4 is required to configure a ET 200eco PN.
The ET 200eco PN can be configured starting from a CPU with extended diagnostics, see
FAQ (https://support.automation.siemens.com/WW/view/en/23678970
).
For information on the individual PROFINET properties that are available for the respective
versions of the ET 200eco PN, refer to theFAQ
(https://support.automation.siemens.com/WW/view/en/44383954
).