Siemens SIMATIC ET 200eco PN - Page 219

IO-Link Master
11.2 IO-Link Master (6ES7148-6JD00-0AB0)
ET 200eco PN
Operating Instructions, 08/2016, A5E01250250-AJ
219
Technical data of the IO-Link Master
Technical data
Dimensions and weight
Dimensions W x H x D (mm) 30 x 200 x 49
Weight
Approx. 550 g
Module-specific data
Transmission rate
100 Mbps full duplex
Transmission mode
100BASE-TX
Autonegotiation
Yes
Bus protocol PROFINET IO
• IRT
Supported Ethernet services PROFINET IO (Device)
• ping
• arp
• LLDP
• Network diagnostics (SNMP)
• DCP
• Port diagnostics
• Media redundancy
• I&M0-3
• Resetting to factory settings
PROFINET interface
• Connection socket
2 × M12 d-coded
• Switch function
Yes, internal
• Autocrossing
Yes; if autonegotiation is enabled
Manufacturer ID (Vendor ID)
002A
H
Device ID (DeviceID)
0306
H
Voltages and currents
Supply voltage 1L+
DC 24 V
• Reverse polarity protection
Yes, against destruction; encoder supply outputs
are connected with reverse polarity
• Infeed current 1L+
Max. 4 A
Load voltage 2L+
DC 24 V
• Reverse polarity protection
Yes
• Infeed current 2L+
Max. 4 A
Current consumption
From supply voltage (1L+)
Typ. 100 mA
From supply voltage (2L+)
Typ. 15 mA
Power loss of the device
Typ. 4.8 W