Siemens SIMATIC ET 200SP - Page 122

Technical data
10.7 Module data
CPU 1515SP PC (F)
122 Manual, 05/2017, A5E32701806-AC
6ES7677-2AA41-0FB0
Input current
Current consumption
(rated value) 1.5 A; full processor load, incl. ET 200SP modules and USB
use
Current consumption (in no-load operation), typ.
0.6 A
Inrush current, max.
4.7 A; rated value
Power
Power consumption, max.
36 W; incl. ET 200SP modules and USB use
Incoming power to the backplane bus
8.75 W
Power loss
Power loss, typ.
15 W; without ET 200SP modules and without USB use
Memory
Type of memory
DDR3-SDRAM
CFast memory card
Yes; 30 GB flash memory
SIMATIC memory card required
No
Work memory
Integrated (for program)
1 MB
Integrated (for data)
5 MB
Integrated (for ODK application)
10 MB
Load memory
Integrated (on PC mass storage medium)
320 MB
Buffering
with UPS
Yes; all retentive declared memory areas
with non
-volatile memory Yes
Hardware configuration
integrated power supply
Yes
Number of DP masters
Via CM
1
Racks
Modules per rack, max.
64; CPU 1515SP PC + 64 module + server module
Number of rows, max.
1
Time-of-day
Clock
Type
Hardware clock
Buffering time
6 wk; at 40 °C ambient temperature, typ.
Deviation per day, max.
10 s; typ.: 2 s
Interfaces
Number of Industrial Ethernet interfaces
2
Number of PROFINET interfaces
1
Number of PROFIBUS interfaces
1
Number of interfaces RS 485
1; via CM DP module
Number of USB interface
s 3; 3x USB 2.0 front, 500 mA each – of which 2 x 500 mA
and 1 x 100 mA simultaneously
Number of SD card slots
1