Siemens SIMATIC TP 270 User Manual

TP 270, OP 270, MP 270B (WinCC flexible)
Operating Instructions, Edition 03/2004, 6AV6691-1DD01-0AB0
9-1
Operate project
9
9.1 Basic principles of operation
9.1.1 Basics for operation in runtime
Introduction
The process control features are defined by the project configuration and the options
available on the HMI device. This chapter contains general information on the settings for the
runtime software and the operation of predefined screen objects.
Screen objects provide general system functions. Screen objects can be used and
configured in screens in the project.
WinCC flexible Runtime can be operated with the keys, the touchscreen or via keyboard and
mouse, depending on the HMI device used.
Multiple key operation
Multiple key operation can trigger unintentional actions.
• When you use a key device, you may not press more than two function keys
simultaneously.
• If a touchscreen is used, do not operate more than one touch object at a time.

Siemens SIMATIC TP 270 Specifications

General

Brand	Siemens
Model	SIMATIC TP 270
Category	Touch Panel
Language	English