Operate project
9.2 Controlling graphic objects
TP 270, OP 270, MP 270B (WinCC flexible)
Operating Instructions, Edition 03/2004, 6AV6691-1DD01-0AB0
9-43
Layout
If the slider control is used as a display object, the represented value is determined by the
position and configuration of the movable slide.
9.2.13.2 Touch control
Procedure
Touch the slider on the touch screen of the HMI device. Move the slider in the desired
direction while keeping contact with the screen.
9.2.13.3 Keyboard control
Procedure
One way to operate the slider control with a keyboard is to use the cursor keys
The following table lists the key combinations for controlling the slider control.
Keys Meaning
SHIFT
+
SHIFT
+
Increase value
SHIFT
+
SHIFT
+
Reduce value
HOME
END
Increase value in 5% increments
F
N
+
HOME
F
N
+
END
Move to maximum/minimum value