Operate project
9.2 Controlling graphic objects
TP 270, OP 270, MP 270B (WinCC flexible)
Operating Instructions, Edition 03/2004, 6AV6691-1DD01-0AB0
9-49
9.2.17.2 Touch control
Procedure
To create a new user, touch an empty line. Then use the screen keyboard to type in the user
name and confirm your entry with <Enter>. Assign a password and a logoff time in the same
way and then select the group.
To change user data, touch the relevant field and make the change.
9.2.17.3 Keyboard control
Procedure
Select the user view with
TAB
according to the configured tab sequence.
• To create a new user, select an empty line using the cursor keys and press
ENTER
.
Enter the user name and press
ENTER
. Use to go to the next field and repeat the
procedure.
• To change the user data, select the desired line using the cursor keys and press
ENTER
.
Make the desired changes and complete the action by pressing
ENTER
.
9.2.17.4 Mouse and keyboard control
Procedure
Mouse
To create a new user account, click an empty line. Type in the user name and confirm your
entry with <Return>. Assign a password and a logoff time in the same way and then select
the group.
To change user data, click the relevant field and make the change.
Keyboard
Select the user view with the <Tab> key according to the configured tab sequence.
To create a new user account, select an empty line using the cursor keys and press
<Return>. Type in the user name and confirm your entry with <Return>. Use <Right> to go
to the next field and repeat the procedure.
To change the user data, select the desired line using the cursor keys and press <Return>.
Then make the relevant changes.
To Next Page
Loading...
Need help?
General
