Operating system and configuration
6.2 Windows CE Control Panel
TP 270, OP 270, MP 270B (WinCC flexible)
6-6 Operating Instructions, Edition 03/2004, 6AV6691-1DD01-0AB0
6.2.4 InputPanel
"InputPanel" option
This function defines the position and size of the screen keyboard when it appears on the
HMI device.
Procedure
1. Select the "Input Panel" option.
2. Move the screen keyboard to the relevant position.
3. To change the size, press the "Start Resize" button.
4. Store the new settings by pressing the "Save" button.
5. Close the option by pressing the
button or the
ESC
key.
Note
In order to store the size and position of the screen keyboard properly and in a fail-safe
way, select the alphanumeric representation prior to saving it.
See also
Open Control Panel (Page 6-2)
6.2.5 Network
"Network" option
Network properties are configured here.
See also
Open Control Panel (Page 6-2)
Configuring the HMI device for network operation (Page 6-19)
To Next Page
Loading...
