Overview
1.7 Options
TP 270, OP 270, MP 270B (WinCC flexible)
Operating Instructions, Edition 03/2004, 6AV6691-1DD01-0AB0
1-13
Assembly on MP 270B 6" Touch, TP 270 6" and OP 270 6"
1. Secure the battery to the back of the HMI device with one cable tie. The position is
indicated by an arrow in the following figures.
Figure 1-4 OP 270 6"
Figure 1-5 MP 270B 6" Touch / TP 270 6"
2. Insert the battery lead connector into the two-pin socket. The plug is coded to prevent
reversed poling.
See also
Replacing the optional backup battery (Page 11-3)
Interfaces (Page 4-6)
To Next Page
Loading...
