Note
For more information on setting up a Maintenance Station refer to the Function manual of PCS
7 Maintenance Station.
Conguration
1. Open the plant view in the SIMATIC Manager.
2. Select the object in the tree view:
– If you are using a multiproject, select the object "[name of the project] MP".
– If you are using a single project, select the object "[name of the project]".
Maintenance Station
5.1Maintenance Station
SIMOCODE DP PCS 7 Library Migration (Legacy) - V9.1 SP2
74 Programming and Operating Manual, 11/2022, A5E51265657002A/RS-AC/003
To Next Page
Loading...
