Siemens SIMOCODE DP

1.3 Product speci󹪝c security information
Product speci󹪝c security information
This library is designed to run under the PCS 7 environment. Therefore, it is recommended to
follow the security principles for PCS 7 to support a secure operation, such as:
• User rights
• Password protection of
– WinCC
– SIRIUS devices
For more information, click here (
https://support.industry.siemens.com/cs/document/
109780811).
1.4 Product discontinuation of SIMOCODE DP Hardware
Important note
3UF5* SIMOCODE DP devices are not available anymore since 10 / 2018.
The product is in discontinued state.
Product note:
(https://support.industry.siemens.com/cs/document/45017946)
Information for switch from SIMOCODE DP to SIMOCODE pro:
(https://support.industry.siemens.com/cs/document/44902576)
Information for SIMOCODE pro PCS 7 Library
(https://support.industry.siemens.com/cs/document/109760422)
SIMOCODE pro devices are available as successor product with enhanced functionality.
It´s recommended to switch to the new devices and recommended software.
Article Numbers SIMOCODE pro
3UF7 000 - 1A*00 - 0 SIMOCODE pro C (PROFIBUS-DP)
3UF7 010 - 1A*00 - 0 SIMOCODE pro V (PROFIBUS-DP)
(Basic Type1 & 2)
3UF7 011 - 1A*00 - 0 SIMOCODE pro V PN (PROFINET-IO)
(Basic Type1, 2 & 3)
3UF7 020 - 1A*01 - 0 SIMOCODE pro S (PROFIBUS-DP)
(Basic Type1 & 2)
3UF7 011 - 1A*00 - * SIMOCODE pro V PN GP (PROFINET-IO)
(Basic Type1, 2 & 3)
Introduction
1.4Product discontinuation of SIMOCODE DP Hardware
SIMOCODE DP PCS 7 Library Migration (Legacy) - V9.1 SP2
8 Programming and Operating Manual, 11/2022, A5E51265657002A/RS-AC/003