Templates
2
2.1 Supported control functions
The library supports all SIMOCODE DP control functions. SIMO_CHN block is used to control the
motor and communicate with SIMOCODE DP device.
This Library supports the following control functions
Table 2-1 Supported Control Functions
No. Control functions SIMOCODE DP
1 Overload Relay ✓
2 Direct starter ✓
3 Reversing starter ✓
4 Star-delta starter ✓
5 Dahlander starter ✓
6 Pole changing starter ✓
7 Solenoid Valve ✓
8 Positioner ✓
9 Soft starter ✓
2.2 Overview of the templates, control functions and blocks
The templates of this library can be adopted unchanged to implement control functions in your
project. The templates thus simplify the engineering for conguring the blocks and they support
their problem-free functioning.
SIMOCODE DP PCS 7 Library Migration (Legacy) - V9.1 SP2
Programming and Operating Manual, 11/2022, A5E51265657002A/RS-AC/003 31
To Next Page
Loading...
Need help?
General
