Configuration
5.4 Mounting
1FN3 linear motors
Configuration Manual, 10/2018, 6SN1197-0AB86-0BP2
155
The following figures show Steps 1 and 3.
Figure 5-26 Mounting of the first segment of the segmented secondary section cover
Figure 5-27 Mounting of a further segment of the segmented secondary section cover
Note
Arranging segments of the cover
If you arrange the butt joints of the cover segments so that they are offset from the butt joints
of the secondary sections, the secondary section track will be better protected against dust.
The segments of the cover also align better.
To Next Page
Loading...
