Siemens SINAMICS S120 - Page 126

Electrical installation
4.5 Connections
Cabinet Modules NEMA
126 Manual, 04/2014, A5E03586450A
Cable routing for the "Safe Torque off" and “Safe Stop 1” functions
Note
Cable routing
The procedure is the same as that for the customer terminal block.
Connect the cable to the terminals to control the functions.
(→ See Chapter "Options", Sectio
n "K82, Terminal Module for activating "Safe Torque Off"
and "Safe Stop 1"")
Cable routing for the Terminal Module TM54F
Note
Cable routing
The proc
edure is the same as that for the customer terminal block.
Connect the cable to the terminals to control the functions.
(
→ See Chapter "Options", Section "K87, Terminal Module TM54F")