Siemens SINAMICS S120 - Page 69

Electrical installation
4.2 Checklist for electrical installation
Cabinet Modules NEMA
Manual, 04/2014, A5E03586450A
69
Item
Action
included/completed?
32 K82,
Terminal Module for
activating safety functions
"Safe Torque Off" and
"Safe Stop 1"
Connect according to "Cable routing for the "Safe Torque
Off" and "Safe STOP 1" functions".
(→ See Chapter "Electrical installation", Section "Cable
routing for the "Safe Torque Off" and "Safe STOP 1" func-
tions")
(→ See Chapter "Options", Section "K82, Terminal Module
for activating safety functions "Safe Torque Off" and "Safe
STOP 1"")
33 K87,
Terminal Module TM54F
Establish the connection according to "Cable routing for
the functions TM54F".
(→ See Chapter "Electrical installation", Section "Cable
routing for the Terminal Module TM 54F")
(→ See Chapter "Options", Section "K87, Terminal Module
TM54F")
34 L25,
circuit breaker in with-
drawable unit design
Wire up the checkback contact.
(→ See Chapter "Options", Section "L25, circuit breaker in
withdrawable unit design")
35 L34,
output-side circuit break-
er
Assign the control parameters.
(→ See Chapter "Options", Section "L34, output-side circuit
breaker")
36 L41,
current transformer up-
stream of main switch
Wire the measuring connections of the current transform-
er.
(→ See Chapter "Options", Section "L41, current trans-
former upstream of main switch")
37 L45,
EMERGENCY OFF
pushbutton in the cabinet
door
Include the option in the EMERGENCY OFF chain.
(→ See Chapter "Options", Section "L45, EMERGENCY
OFF pushbutton in the cabinet door")
38 L50,
cabinet lighting with ser-
vice socket
Connect the power supply.
(→ See Chapter "Options", Section "L50, cabinet lighting
with service socket")
39 L55,
cabinet anti-condensation
heating
Connect the power supply.
(→ See Chapter "Options", Section "L55, cabinet anti-
condensation heating")
40 L87,
insulation monitoring
Integrate the option into the plant-side fault and alarm
circuit.
(→ See Chapter "Options", Section "L87, insulation moni-
toring")