Siemens SIPART PS2 - Page 155

Direction of action and hysteresis
/LPLW
$
$
ZD\
0,1
0,1
0,1
0,1
0$;
0$;
0$;
0$;
0,1
0$;
0,1
0$;
Alarm module
Examples A1 A2
A1 = 48
AFCT = MIN / MAX
A2 = 52
Way =45 Active
Way =50
Way =55 Active
A1 = 48
AFCT = -MIN / -MAX
A2 = 52
Way =45 Active
Way =50 Active Active
Way =55 Active
A1 = 52
AFCT = MIN / MAX
A2 = 48
Way =45 Active
Way =50 Active Active
Way =55 Active
A1 = 52
AFCT = -MIN / -MAX
A2 = 48
Way =45 Active
Way =50
Way =55 Active
Note
If the extended diagnostic is activated using parameter "'50.XDIAG' Activation of extended
diagnostics (Page 160)" with setting "On3", then the alarms are not output through the alarm
module. Alarm A1 is output with setting "On2". However, notification via the communication
interface is possible at any time.
Parameter assignment
8.3 Description of parameters
SIPART PS2 with PROFIBUS PA
Operating Instructions, 05/2019, A5E00127926-AC 155