Siemens SIPART PS2 User Manual

15.4 Scope of delivery EMC filter module
Cable glands and adapters
The EMC filter module is supplied with various cable glands and adapters. The following figure
shows the different variants.
1 2 3
6 5 4
Connections ① to ③ for power supply Connections ④ to ⑥ for optional modules
① Adapter M20 to ½-14 NPT for
6DR5..0/1/2/3-0.N/P
④ Cable gland for connection thread M20x1.5
with seal insert for 6DR55/6..0-0.G/M/R/S
② M12 connector for device version with
PROFIBUS or FOUNDATION fieldbus
communication for 6DR55/6..-0.R/S
⑤ Blanking plug for device version without op‐
tional modules 6DR5...-0..00
③ Cable gland for connection thread M20x1.5
for 6DR5..0/1/2/3-0.G/M
⑥ Adapter M20 to ½-14 NPT for
6DR5..0/1/2/3-0.N/P
Figure 15-1 Positioner with the different cable glands and adapter
Scope of delivery EMC filter module
Description
EMC filter module C73451-A430-L8
Sealing ring for ⑥
Cable tie
⑥ Adapter M20 to ½-14 NPT
④ Cable gland for connection thread, gray
④ Cable gland for connection thread, blue
Sealing set for ④
Sealing set plug for ④
Screw for plastic
Oval head screw M3x6
Spare parts/accessories/scope of delivery
15.4 Scope of delivery EMC filter module
SIPART PS2 with PROFIBUS PA
304 Operating Instructions, 05/2019, A5E00127926-AC

Siemens SIPART PS2 Specifications

General

Supply Pressure	1.4 to 7 bar (20 to 100 psi)
Enclosure Rating	IP66/NEMA 4X
Communication Protocols	HART, PROFIBUS PA, FOUNDATION Fieldbus
Output Pressure	0 to 100% of supply pressure
Hazardous Area Certification	ATEX, IECEx, FM, CSA
Type	Electropneumatic
Input Signal	4-20 mA
Rotation Angle	30° to 90°
Operating Temperature	-40°C to +80°C
Mounting	Linear and rotary actuators
Air Consumption	Typically less than 0.1 kg/h